17% pH Up Potasium Carbonate 0.0.17

Price range: $6.99 through $41.99

A 17% potassium carbonate solution (such as Nutri+ pH+ 17%) is a liquid additive used to safely raise the pH level of nutrient solutions in hydroponics and garden systems. [1, 2]
How It Works
  • pH Correction: It is an alkaline liquid that increases the pH of acidic water or nutrient mixes. Proper pH (usually between 5.5 and 6.5 for most plants) allows roots to absorb nutrients easily. [1, 2, 3]
  • Potassium Supplement: The “0-0-17” label means it contains 17% soluble potash (potassium), which supports plant functions like water regulation and enzyme activation during growth and blooming. [1]
How to Use It
  • Mix Nutrients First: Always add your base fertilizers to your water and mix thoroughly before testing or adjusting the pH. [1, 2]
  • Add Sparingly: Shake the bottle well, then add just a few drops or a tiny measured amount (such as 1–3 ml per gallon, depending on your water) to your reservoir. [1, 2, 3]
  • Stir and Test: Stir the water well, wait a moment, and test the pH with a meter or drop kit. [1, 2]
  • Repeat: Repeat the process in small steps until you reach your target pH. Adding too much at once can cause a sharp spike or lock out other minerals like calcium and magnesium

Description

A 17% potassium carbonate solution (such as Nutri+ pH+ 17%) is a liquid additive used to safely raise the pH level of nutrient solutions in hydroponics and garden systems. [1, 2]
How It Works
  • pH Correction: It is an alkaline liquid that increases the pH of acidic water or nutrient mixes. Proper pH (usually between 5.5 and 6.5 for most plants) allows roots to absorb nutrients easily. [1, 2, 3]
  • Potassium Supplement: The “0-0-17” label means it contains 17% soluble potash (potassium), which supports plant functions like water regulation and enzyme activation during growth and blooming. [1]
How to Use It
  • Mix Nutrients First: Always add your base fertilizers to your water and mix thoroughly before testing or adjusting the pH. [1, 2]
  • Add Sparingly: Shake the bottle well, then add just a few drops or a tiny measured amount (such as 1–3 ml per gallon, depending on your water) to your reservoir. [1, 2, 3]
  • Stir and Test: Stir the water well, wait a moment, and test the pH with a meter or drop kit. [1, 2]
  • Repeat: Repeat the process in small steps until you reach your target pH. Adding too much at once can cause a sharp spike or lock out other minerals like calcium and magnesium

Additional information

size

250ml, 500ml, 1Liter, 4Liter